Wednesday, September 14, 2011

How do i change out my headlights for a 1998 ford Mustang?

i know there is a clip but after that im lost Do i have to take the side light off to do it ?

thanksHow do i change out my headlights for a 1998 ford Mustang?
If your jus changing bulbs, that can be done from behind lights.

If your changing housing, side markers do need to come off, its very simple for do it yourselfers.

Aftrmkt lights come w/ directions. Jus look everything over, take your time, remember where everthing goes.

Im not positive about ur car but some lights have pop in clips!How do i change out my headlights for a 1998 ford Mustang?
No you can reach the connector from behind the light.How do i change out my headlights for a 1998 ford Mustang?
If its like the 99(yeah yeah body revision at 99) theres these 2 pins you pull up and then all you have to do is detatch the lightbulbs and pull up.
  • creating file
  • myspace ip
  • How to change a headlight bulb in a 2007 aveo hatchback?

    hi my husband is in the hospital and our headlight blew out and i can not figure out how to get it out to change it .How to change a headlight bulb in a 2007 aveo hatchback?
    http://www.ehow.com/how_2630_replace-car



    http://www.haynes.com/video.downloadsHow to change a headlight bulb in a 2007 aveo hatchback?
    It' relatively easy...most parts stores will do it for you for free..if you do it yourself...do not touch the glass part of the bulb..

    Change the headlight bulbs on a 2002 Nissan Altima?

    I am not very knowledgeable when it comes to cars. I need to replace the bulbs for my headlights. The Nissan manual says to take it to the dealer. How much would they charge for something like that? Is it easier to do it myself without breaking something else? It looks like you have to move certain pieces to get to the light? Any advice from someone who knows about this car%26gt;Change the headlight bulbs on a 2002 Nissan Altima?
    1. You need to find the size for your car (check here http://www.sylvania.com/ConsumerProducts

    2. If installing it yourself, make sure you wear gloves and DO NOT touch the bulbs with your fingers if you're not wearing gloves.

    3. It's pretty simple, just take out the plug that connects to the bulbs, then take the bulbs out carefully and replace and plug back in.Change the headlight bulbs on a 2002 Nissan Altima?
    Actually first couple of years Altima's had a Grounding issue reacall. NTB05-057 %26quot; PB135 %26quot; Please get you car back to the dealer to catch up with the recalls and service campaigns. I am just guessing here it is the low beam light(s) that are not working. High beam lamps are harder to change. With a little luck you may end up with a new headlight assembly.

    Thursday, June 2, 2011

    How to change the headlight for 2000 avalon on drivers side. please explain me how to open the latch that is a

    How to change the headlight for 2000 avalon on drivers side. please explain me how to open the latch that is attached with the bulb. I have the bulb, but I am finding problems to open the latch. Please let me know. ThanksHow to change the headlight for 2000 avalon on drivers side. please explain me how to open the latch that is a
    There should be a rubber boot covering the back of the headlight where the wire goes into.

    When you remove the wire the boot will pull off and there is a spring clip behind it, The spring holds the bulb in place.

    Push in and move Down, If you look it is in a hook to hold it.

    How do i change the headlight bulb on my 1990 Honda Accord lx?

    I feel kind of stupid asking this, yesterday i went to change the bulb and i just couldn't figure out how to get to the stupid thing!How do i change the headlight bulb on my 1990 Honda Accord lx?
    http://www.diynetwork.com/diy/ab_parts_aHow do i change the headlight bulb on my 1990 Honda Accord lx?
    You may have to move the power steering out of the way to get to the bulb if the headlight is on the drivers side. Just pop the power steering canister out of place (it will stay connected) and reach for the bulb.How do i change the headlight bulb on my 1990 Honda Accord lx?
    there is a retaining ring that holds the buld into the headlight assembly. to replace the bulb, first disconnect the connector from the old bulb. There is a tab on the top of the connector that pushes backward (toward the engine) and with the tab released and held back you can push the connector downward to remove it. On many of the older cars you need to use a flat blade screwdriver to push the sides of the connector downward because the connectors are stuck on from years of dirt and grime buildup.



    with the connector removed you can reach the retaining ring that holds the bulb in. the retainer ring is a circular ring that locks the bulb in place. to release the bulb you turn the retaining ring counter-clockwise (when looking at the ring from the engine). The ring should turn between 1/8 and 1/4 turn before the bulb will pull out. The bulb comes out straight rearward.



    you replace the bulb by reversing the above steps. As a caution, don't handle the bulb by the glass; only touch the plastic housing or you'll cause the new bulb to fail prematurely.



    you may have to remove the power steering reservoir or the air inlet tube on some models (the thing that looks like a periscope on the right side--it just pulls straight up and out) to get to the bulb if you have big hands, but it shouldn't be too much of a problem.



    hope that answers your questionHow do i change the headlight bulb on my 1990 Honda Accord lx?
    This site has some pictures showing how to change the bulbs:

    http://www.diynetwork.com/diy/ab_parts_accessories/article/0,2021,DIY_13690_3579214,00.html

    How do I change out the headlights on a 2006 Nissan Titan?

    I just bought some brighter lights for my Titan and I can't figure out where to start on switching them out with the old ones. It looks like I'm going to have to take a lot of it apart to get to them. Anybody able to help me with this?How do I change out the headlights on a 2006 Nissan Titan?
    Go to a garage. Let a mechanic do it if you have no experience.How do I change out the headlights on a 2006 Nissan Titan?
    Those plastic trim cover under the lights may break taking them off if you don't know how to remove them grill work has to be removed seven square 1/4 with screwdriver slots and 2' long screwdriver and flashlight to release the grill if your skinny armed and double jointed you can remove the 2 ten millimeter bolts under each head light and the other ones you see on the inside top and behind the inner fender liners. A body shop or Nissan Technician who has had the front ends off of a Titan is who I would get to replace those lights. Also check your truck for recalls the condenser cooling fan may need inspecting.How do I change out the headlights on a 2006 Nissan Titan?
    there are usually just some pins that hold the headlights in place under the hood. they make it so it is not hard, and if you dont find any easy way to get the headlights out then check the book that came with your truck.How do I change out the headlights on a 2006 Nissan Titan?
    http://www.titantalk.com/forums/titan-fa
  • web hosting plans
  • skin fairy
  • How do I change the headlight on a 2003 mini cooper?

    So I was at the grocery store tonight and when I got back in my car the headlight went out. I don't want to buy a complete headlamp and I have looked to see where I can buy only the bulb, but where can I find information on how to change the bulb once I buy it, or will the bulb come with instructions on how to insert it?How do I change the headlight on a 2003 mini cooper?
    What kind of lighting do you have, Halogen or Xenon?



    If you go here: http://www.realoem.com/bmw/select.do and enter the requested information, you can find exploded views of your car's headlight assemblies.



    The Bentley Publications %26quot;Complete Official Mini Cooper%26quot; manual is invaluable if you plan to do much of your own work on the car. Amazon has the best price. It's a factory workshop manual.



    The forums at NAM are also great: http://www.northamericanmotoring.com/for