are you talking about the whole headlight assembly or just the bulbs????
to take the whole assembly out you have to remove the bumper
there is some info on www.dodgeintrepid.net
its a site for all LH body cars including yoursDoes anyone know how to change a headlight on a 2000 chrysler concorde?
It comes out through the back of the light assembly. Detailed instructions are in your owners manual.
Thursday, September 22, 2011
How to change a headlight on an 08 ford escape?
i need to know how to get the globe off... how to change the light... where to get a light... basically i need a step by step instruction on how to do everything to change my light and get it but to functioning like before :) How to change a headlight on an 08 ford escape?
It probably would be under warranty, but if for some reason that's not the case or not practical;
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it counterclockwise and then pulling it straight out.
5. Disconnect the electrical connector from the bulb.
6. Connect the electrical connector on the new bulb.
7. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb clockwise to install.
Handle a halogen headlamp bulb carefully and keep out of children檚 reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
The Headlamps trade number (generic ) is H13. You can purchase a bulb at Autozone, Sylvania H13 for $13.99. I imagine most other Auto Parts stores would have them too.How to change a headlight on an 08 ford escape?
if it's a 2008 and under 36,000 miles, I'd bring it back to the FOrd dealer as the bulb is under warranty and they will fix it for free.
IF not the instructions are in the owners manual on how to remove and replace the bulb. This also usually involves the use of mechanics tools BTW so it's gotten out of everyday hands to do anymore
It probably would be under warranty, but if for some reason that's not the case or not practical;
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it counterclockwise and then pulling it straight out.
5. Disconnect the electrical connector from the bulb.
6. Connect the electrical connector on the new bulb.
7. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb clockwise to install.
Handle a halogen headlamp bulb carefully and keep out of children檚 reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
The Headlamps trade number (generic ) is H13. You can purchase a bulb at Autozone, Sylvania H13 for $13.99. I imagine most other Auto Parts stores would have them too.How to change a headlight on an 08 ford escape?
if it's a 2008 and under 36,000 miles, I'd bring it back to the FOrd dealer as the bulb is under warranty and they will fix it for free.
IF not the instructions are in the owners manual on how to remove and replace the bulb. This also usually involves the use of mechanics tools BTW so it's gotten out of everyday hands to do anymore
How to change a headlight on an 08 ford escape?
i need to know how to get the globe off... how to change the light... where to get a light... basically i need a step by step instruction on how to do everything to change my light and get it but to functioning like before :)How to change a headlight on an 08 ford escape?
It probably would be under warranty, but if for some reason that's not the case or not practical;
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it counterclockwise and then pulling it straight out.
5. Disconnect the electrical connector from the bulb.
6. Connect the electrical connector on the new bulb.
7. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb clockwise to install.
Handle a halogen headlamp bulb carefully and keep out of children檚 reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
The Headlamps trade number (generic ) is H13. You can purchase a bulb at Autozone, Sylvania H13 for $13.99. I imagine most other Auto Parts stores would have them too.
How to change a headlight on an 08 ford escape?
if it's a 2008 and under 36,000 miles, I'd bring it back to the FOrd dealer as the bulb is under warranty and they will fix it for free.
IF not the instructions are in the owners manual on how to remove and replace the bulb. This also usually involves the use of mechanics tools BTW so it's gotten out of everyday hands to do anymore
How to change a headlight on an 08 ford escape?
You need to change the headlight bulb. You don't need to remove the whole head light assembly. Open the hood and look right behide the headlight you will see plugs and wire going threw it. You need to just pull is off and you will see the light bulb. You will need a little flat head screw driver to remove the wire harness from the bulb. All you need is to lift the clip holding the plug onto the bulb and pull it away from each other. I am not sure what your Escape use, but Ford like to use %26quot;90007%26quot; bulb. You will have to look at the old bulb or take it to your auto parts store.
I would also recommend replace both at the same time. The chances of you having to do this all the time is pretty high if you only do one size.
When you do get a new bulb, do not touch the glass with your fingers! You will need to use a clean towel to hold it. The oil on your finger will ruined the bulb.
It probably would be under warranty, but if for some reason that's not the case or not practical;
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it counterclockwise and then pulling it straight out.
5. Disconnect the electrical connector from the bulb.
6. Connect the electrical connector on the new bulb.
7. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb clockwise to install.
Handle a halogen headlamp bulb carefully and keep out of children檚 reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
The Headlamps trade number (generic ) is H13. You can purchase a bulb at Autozone, Sylvania H13 for $13.99. I imagine most other Auto Parts stores would have them too.
How to change a headlight on an 08 ford escape?
if it's a 2008 and under 36,000 miles, I'd bring it back to the FOrd dealer as the bulb is under warranty and they will fix it for free.
IF not the instructions are in the owners manual on how to remove and replace the bulb. This also usually involves the use of mechanics tools BTW so it's gotten out of everyday hands to do anymore
How to change a headlight on an 08 ford escape?
You need to change the headlight bulb. You don't need to remove the whole head light assembly. Open the hood and look right behide the headlight you will see plugs and wire going threw it. You need to just pull is off and you will see the light bulb. You will need a little flat head screw driver to remove the wire harness from the bulb. All you need is to lift the clip holding the plug onto the bulb and pull it away from each other. I am not sure what your Escape use, but Ford like to use %26quot;90007%26quot; bulb. You will have to look at the old bulb or take it to your auto parts store.
I would also recommend replace both at the same time. The chances of you having to do this all the time is pretty high if you only do one size.
When you do get a new bulb, do not touch the glass with your fingers! You will need to use a clean towel to hold it. The oil on your finger will ruined the bulb.
How to change the headlight in a Honda Odyssey 2002?
Buy a bulb, unscrew the screws with a screw driver, twist the bulb housing out of the casing, remove the old bulb, replace it, twist the bulb housing back into the casing, and screw the whole thing back to the car.How to change the headlight in a Honda Odyssey 2002?
Using a screwdriver isn't required for a 2002... this worked for me:
http://wiki.answers.com/Q/How_do_you_replace_a_headlight_on_a_2000_Honda_odyssey
There r no screws. Behind the head light, you need to pull the rubber back and twist the whole thing intil the 3 tabs line up and pull it out. The disconnect the harness.
DONT touch the new bulb with your fingers!
The oil will cause it to burn out within a month.How to change the headlight in a Honda Odyssey 2002?
First, remove the wiring harness attached to the bulb. Then remove the rubber gasket that surrounds the base. You'll see a wire latch that holds the bulb in place. Push the wire tab in and to the side and it will release from the latch. Note the orientation of the bulb in the holder to make it easier to install the new one.
Reverse the procedure order to install the bulb, making sure your skin does not directly touch the glass portion of the new bulb. Apply some electrical grease to the harness to ensure good contact to the bulb's pins.How to change the headlight in a Honda Odyssey 2002?
Buy a manual and you can work on your own car pay your self.How to change the headlight in a Honda Odyssey 2002?
Take it to a mechanic who knows howHow to change the headlight in a Honda Odyssey 2002?
its easy man...just smash em up realy good...until they become tiny little pieces...then vacuum them out...then glue the news one....because now you have room...i suggest supper glueHow to change the headlight in a Honda Odyssey 2002?
I love cars, and that檚 why I created this website; www.carplanetzone.4t.com We have all kinds of cool things on this site, including state of the art technology, and in depth information on new cars. Check out this website now?www.carplanetzone.4t.com
Using a screwdriver isn't required for a 2002... this worked for me:
http://wiki.answers.com/Q/How_do_you_replace_a_headlight_on_a_2000_Honda_odyssey
Report Abuse
How to change the headlight in a Honda Odyssey 2002?There r no screws. Behind the head light, you need to pull the rubber back and twist the whole thing intil the 3 tabs line up and pull it out. The disconnect the harness.
DONT touch the new bulb with your fingers!
The oil will cause it to burn out within a month.How to change the headlight in a Honda Odyssey 2002?
First, remove the wiring harness attached to the bulb. Then remove the rubber gasket that surrounds the base. You'll see a wire latch that holds the bulb in place. Push the wire tab in and to the side and it will release from the latch. Note the orientation of the bulb in the holder to make it easier to install the new one.
Reverse the procedure order to install the bulb, making sure your skin does not directly touch the glass portion of the new bulb. Apply some electrical grease to the harness to ensure good contact to the bulb's pins.How to change the headlight in a Honda Odyssey 2002?
Buy a manual and you can work on your own car pay your self.How to change the headlight in a Honda Odyssey 2002?
Take it to a mechanic who knows howHow to change the headlight in a Honda Odyssey 2002?
its easy man...just smash em up realy good...until they become tiny little pieces...then vacuum them out...then glue the news one....because now you have room...i suggest supper glueHow to change the headlight in a Honda Odyssey 2002?
I love cars, and that檚 why I created this website; www.carplanetzone.4t.com We have all kinds of cool things on this site, including state of the art technology, and in depth information on new cars. Check out this website now?www.carplanetzone.4t.com
How do i change a headlight in a 2001 nissan xtera?
my headlight is out and i don't know how to change it. it looks really simple but i don't want to break anything so please help meHow do i change a headlight in a 2001 nissan xtera?
Conversion Kit... There expensive though they range anywhere from 300-1000 dollarsHow do i change a headlight in a 2001 nissan xtera?
if you go a good part store they should be able to assist you.can anyone tell me how to parameter
Conversion Kit... There expensive though they range anywhere from 300-1000 dollarsHow do i change a headlight in a 2001 nissan xtera?
if you go a good part store they should be able to assist you.
Has anyone ever changed their headlights for 1998 pathfinder to HID lights?
I'm thinking of changing my lights to HID. and im trying to get some info. of how to do it with out having to do much rewiring.
any kits anyone know of.?Has anyone ever changed their headlights for 1998 pathfinder to HID lights?
You can find plenty of kits on eBay or online, but converting your headlights to HID does take some elbow grease. There's a fair amount of assembly and cable-tying to do, and you've got to have a good place to mount your ballasts so that they'll stay nice and dry.
That being said, what you're talking about is swapping out halogen bulbs from a reflector assembly that was designed for halogen light output and replacing them with High Intensity Discharge Xenon bulbs, which produce a different kind of light that needs to be reflected differently than halogen light.
I have to ask that you do your fellow drivers on the road a favor and not do this conversion - the resultant glare from the improper reflection of the extra bright light can blind oncoming traffic even in a sedan or smaller vehicle, but installing these conversion kits on an SUV is really criminal. SUVs blind other vehicles enough as it is, just imagine that with twice the lighting power, plus the light is reflected in the wrong direction (ie. Up instead of down at the road!)
The alternative to blinding oncoming traffic is to adjust your headlights so that they are aiming as far down as possible, and that reduces your visibility to the point that having HIDs provides no benefit to you.
Please consider alternatives if all you're after is the look, (like halogen bulbs with a blue tint) as conversions are illegal and, in your case, potentially dangerous.
Best of luck!Has anyone ever changed their headlights for 1998 pathfinder to HID lights?
its easy. just plug and play. first remove your halogen bulbs. connect your hid bulbs to ballasts. find nice dry place to secure the ballasts. then connect the hid wires.
any kits anyone know of.?Has anyone ever changed their headlights for 1998 pathfinder to HID lights?
You can find plenty of kits on eBay or online, but converting your headlights to HID does take some elbow grease. There's a fair amount of assembly and cable-tying to do, and you've got to have a good place to mount your ballasts so that they'll stay nice and dry.
That being said, what you're talking about is swapping out halogen bulbs from a reflector assembly that was designed for halogen light output and replacing them with High Intensity Discharge Xenon bulbs, which produce a different kind of light that needs to be reflected differently than halogen light.
I have to ask that you do your fellow drivers on the road a favor and not do this conversion - the resultant glare from the improper reflection of the extra bright light can blind oncoming traffic even in a sedan or smaller vehicle, but installing these conversion kits on an SUV is really criminal. SUVs blind other vehicles enough as it is, just imagine that with twice the lighting power, plus the light is reflected in the wrong direction (ie. Up instead of down at the road!)
The alternative to blinding oncoming traffic is to adjust your headlights so that they are aiming as far down as possible, and that reduces your visibility to the point that having HIDs provides no benefit to you.
Please consider alternatives if all you're after is the look, (like halogen bulbs with a blue tint) as conversions are illegal and, in your case, potentially dangerous.
Best of luck!Has anyone ever changed their headlights for 1998 pathfinder to HID lights?
its easy. just plug and play. first remove your halogen bulbs. connect your hid bulbs to ballasts. find nice dry place to secure the ballasts. then connect the hid wires.
How do i change a headlight bulb (right side) on a 2001 cadillac?
there's no space behind it to get your hand in, and there's no screws holding the lens on! thanks for any help.How do i change a headlight bulb (right side) on a 2001 cadillac?
its actually really easy. all you have to do is pop the bulb out of its socket, its usually held in with a pressure ring that you just squeeze to re lease or twist out to unlock it, then you pull the bulb out of the socket and replace it then put the new bulb in the same way you took it out.
good luck
its actually really easy. all you have to do is pop the bulb out of its socket, its usually held in with a pressure ring that you just squeeze to re lease or twist out to unlock it, then you pull the bulb out of the socket and replace it then put the new bulb in the same way you took it out.
good luck
Subscribe to:
Posts
(Atom)