i need to know how to get the globe off... how to change the light... where to get a light... basically i need a step by step instruction on how to do everything to change my light and get it but to functioning like before :)How to change a headlight on an 08 ford escape?
It probably would be under warranty, but if for some reason that's not the case or not practical;
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it counterclockwise and then pulling it straight out.
5. Disconnect the electrical connector from the bulb.
6. Connect the electrical connector on the new bulb.
7. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb clockwise to install.
Handle a halogen headlamp bulb carefully and keep out of children檚 reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
The Headlamps trade number (generic ) is H13. You can purchase a bulb at Autozone, Sylvania H13 for $13.99. I imagine most other Auto Parts stores would have them too.
How to change a headlight on an 08 ford escape?
if it's a 2008 and under 36,000 miles, I'd bring it back to the FOrd dealer as the bulb is under warranty and they will fix it for free.
IF not the instructions are in the owners manual on how to remove and replace the bulb. This also usually involves the use of mechanics tools BTW so it's gotten out of everyday hands to do anymore
How to change a headlight on an 08 ford escape?
You need to change the headlight bulb. You don't need to remove the whole head light assembly. Open the hood and look right behide the headlight you will see plugs and wire going threw it. You need to just pull is off and you will see the light bulb. You will need a little flat head screw driver to remove the wire harness from the bulb. All you need is to lift the clip holding the plug onto the bulb and pull it away from each other. I am not sure what your Escape use, but Ford like to use %26quot;90007%26quot; bulb. You will have to look at the old bulb or take it to your auto parts store.
I would also recommend replace both at the same time. The chances of you having to do this all the time is pretty high if you only do one size.
When you do get a new bulb, do not touch the glass with your fingers! You will need to use a clean towel to hold it. The oil on your finger will ruined the bulb.
